SH-910HD REPAIR INSTRUCTIONS

Use this repair on SH-910HD that has a blank screen or can not start the MENU.

  1. IMPORTANT: Format your USB flash drive to FAT or FAT32
  2. Copy the repair software attached to the USB flash drive root directory
    Note: DO NOT CHANGE FILE NAME
  3. Insert USB flash drive into the meters USB interface
  4. Turn on your meter
  5. Wait 5 minutes
  6. Turn off your meter
  7. Remove the USB flash drive
  8. Restart your meter

All software is offered "as is" and without guarantee. This software is for experienced users only. If you don't have the ability to load this software or if you feel unsure of your abilities, DO NOT use this software. DMS International is in no way responsible for the use or mis-use of this software. Any repairs required because of your use or mis-use of this software will be charged at normal bench repair rates and normal replacement parts cost. By using this software you are agreeing to these terms.

USE THIS SOFTWARE AT YOUR OWN RISK

These files may NOT be freely distributed and may NOT modified in any way. This comment must remained attached to the files.

Quick Links